Categories
Cottage Life

Use this DIY trick to reduce drafts in the cottage

Cottagers are all too familiar with drafts that freeze toes on cold weekends. Windows, even double-glazed, are to blame for a lot of heat loss in cottages. Closing the curtains helps keep warmth in, but a curtain alone is less than ideal. That’s because heat transfers from the pocket of air behind the curtain out through the glass. Once cooled, the air drops to the floor and spreads out into the room. Warm air near the ceiling is pulled down into that just-vacated space, so more warmth is lost and the draft continues.

7 easy ways to stop drafts in your cottage

 Luckily, there’s a DIY solution that reduces drafts and your energy costs. Pelmets are boxes that cover the tops of your window coverings. Often thought of as purely decorative ways to hide drapery hardware, pelmets can also reduce heat loss by closing in the tops of your (ideally floor-length) curtains or blinds and cutting off that drafty airflow. In the summer, they also help prevent the warm air that heats up inside curtains from moving into your cooler room.

8 tips to save energy (and money!) in the winter

 It’s easy to build custom pelmets for your windows: just measure across each of your window openings and build a box (with a front, top, and two ends) to size. Remember to add length and depth so your curtains can move freely and open fully. Attach the pelmet to the wall using brackets and cover it with fabric, wallpaper, or paint—or leave the wood bare. You can even use the top surface as a handy shelf. Comfort for the eyes, pocketbook, and toes.

This article was originally published in the Winter 2022 issue of Cottage Life.

Categories
Cottage Life

Lumber is still expensive—can you mill your own trees?

Since lumber prices remain quite high, cottage builders and DIYers are turning to felling and custom-milling lumber from their own properties. “It’s quite beneficial for a lot of property owners who have trees to turn into lumber that they can then use for a project,” says Chad Higgins, the owner of Westcoast Custom Timber in Victoria, B.C. Prices for custom felling and milling timber vary widely depending on the project, but Higgins says it usually costs a third to half of the price that you’d pay to buy the lumber from a retailer.

For Westcoast Custom Timber, for example, a tree that has already fallen might cost as little as $150 to remove and mill; prices could shoot upward to $1,500 if Higgins has to bring in extra equipment and take additional safety precautions to take the tree down. But in general, his clients usually pay between 75 cents a board foot up to $1.05—still considerably cheaper than big box store prices, which were upwards of $1.50 even before the pandemic.

lumber in the process of being milled into planks
Photo by Chad Higgins

Higgins also notes that in order to use the lumber for home construction, a lumber grader or engineer must certify the wood to ensure it’s safe to build with. Ungraded lumber can be used for any building project not intended for habitation, such as a shed, dock, or deck. Getting the grading could cost between $250 and $1,000 for common projects, but it depends on the size. Custom milling services can also be found on sites such as Kijiji or Facebook Marketplace.

Categories
Cottage Life

Dremel rotary tool review: add this to your cottage arsenal

Our editorial team independently selects these products. If you choose to buy any, we may earn a commission that helps fund our content. Learn more.

Rotary tools, known generically by the brand name Dremel, are common in the craft world, but they are a great addition to your cottage tool box. When tackling a project that requires the finesse of small hand tools but the oomph of a power tool, a rotary tool is the perfect fit. Here are a few jobs that will be a breeze with one:

 1. Refinish a peeling railing instead of replacing it. Regular sanders can deal with large, flat areas but are a pain in tight spots. Fit a rotary tool with an abrasive disc or bit to make detail sanding less painful. 

 2. Replacing a broken tile? Try spinning a carbide bit to make quick work of removing hard-to-reach grout.

 3. Snapped the head off a screw? Use a small cut-off wheel to grind a slot in the remaining shaft and remove the screw with a flathead screwdriver.

An entry level Dremel tool will run about $50, and the price goes up for additional features such as variable speed or more power for heavier work. There are also cordless models available for increased convenience and mobility. If you’re only going to use your tool occasionally, there are a ton of inexpensive, lesser-known brands, just make sure the one that you choose has a universal chuck that will accept bits from different manufacturers. That way, you can pick up new attachments from a variety of sources.

Categories
Mobile Syrup

B.C. project to improve Highway 3 cell coverage between Hope and Keremeos

The B.C. government announced a new project to improve cellular coverage along Highway 3 between Hope and Keremeos.

The project will see the addition of 11 new cell towers along an estimated 93km of the highway. In a release, the B.C. government said the added towers will improve safety for users as the province works to strengthen highway infrastructure following recent flooding.

“We are working hard to expand connectivity where it’s most needed in the province,” said Lisa Beare, B.C.’s minister of citizens’ services, in the release.

“Cellular coverage along key transport routes like Highway 3 is important for both commercial and recreational travellers, as it will enable people to stay connected and to access road safety updates and important emergency services while on the road.”

The release notes that cell coverage along the described section of Highway 3 is intermittent. The coverage gaps between Hope and Manning Park, and the gaps between Princeton and Keremeos present the greatest challenge. However, the project should lead to consistent coverage along the whole route.

The provincial government will invest up to $3.1 million through the Connecting British Columbia grant program. The Northern Development Initiative Trust (NDIT) will administer the grant, which will partially fund the project’s $9.7 million cost. Rogers Communications will foot the rest of the bill.

B.C. expects the project to be completed by fall 2024.

Thanks Kris!

Header image credit: Shutterstock

Source: B.C. government

Categories
Cottage Life

A simple modification guaranteed to make your Muskoka chair more comfortable

What could be more comfortable than lounging in a Muskoka chair? Answer: an upgraded Muskoka chair. The lumbar spine—your lower back—is often tested by the cottage lounger. By adding lumbar support to the flat backrest, you can bring your spine into its proper alignment. Better ergonomics can improve your breathing and circulation, as well as reduce spinal pressure and muscle stress. This all adds up to greater relaxation!

Curved strips fastened on top of the existing back slats will provide support for the spine. Any dry 2x lumber will work to create the supports—one support per slat. Make a pattern by drawing an arc on cardboard, using a compass set to a radius of 10″. Cut off a slice (a chord, technically) with an 8″ base. Trim 1/8″ from each end of the pattern; those sharply tapered ends will just chip off unevenly when you’re sawing and sanding.

To make supports that sit cleanly against the chair slats, you’ll need to saw or plane off the radiused corners on the lumber to leave sharp, square corners. Then cut the curve with a jigsaw (or a scrollsaw or bandsaw).

Using one of the offcuts as a curved sanding block, sand off any saw marks with 80-grit sandpaper, followed by 100-grit. And while you’re at it, lightly round over the long, curved edges. For the finish, I like Sansin ENS for outdoor furniture; it’s highly durable, quick-drying, and enviro-friendly. For longevity, finish the backs of the supports before attaching. If your upgrade is to a new Muskoka chair, you’ll want to finish the slat fronts too. 

Test-fit the supports before securing them permanently. Tape the supports in place, with the bottom edge 3″–5″ above the seat. Have different users sit to test the support position for comfort. Once the supports feel right, attach each from behind with two small stainless-steel screws. Then remove the tape and relax. Did someone say, “Cottage Kolsch time?”

Categories
Cottage Life

A simple modification guaranteed to make your Muskoka chair more comfortable

What could be more comfortable than lounging in a Muskoka chair? Answer: an upgraded Muskoka chair. The lumbar spine—your lower back—is often tested by the cottage lounger. By adding lumbar support to the flat backrest, you can bring your spine into its proper alignment. Better ergonomics can improve your breathing and circulation, as well as reduce spinal pressure and muscle stress. This all adds up to greater relaxation!

Curved strips fastened on top of the existing back slats will provide support for the spine. Any dry 2x lumber will work to create the supports—one support per slat. Make a pattern by drawing an arc on cardboard, using a compass set to a radius of 10″. Cut off a slice (a chord, technically) with an 8″ base. Trim 1/8″ from each end of the pattern; those sharply tapered ends will just chip off unevenly when you’re sawing and sanding.

To make supports that sit cleanly against the chair slats, you’ll need to saw or plane off the radiused corners on the lumber to leave sharp, square corners. Then cut the curve with a jigsaw (or a scrollsaw or bandsaw).

Using one of the offcuts as a curved sanding block, sand off any saw marks with 80-grit sandpaper, followed by 100-grit. And while you’re at it, lightly round over the long, curved edges. For the finish, I like Sansin ENS for outdoor furniture; it’s highly durable, quick-drying, and enviro-friendly. For longevity, finish the backs of the supports before attaching. If your upgrade is to a new Muskoka chair, you’ll want to finish the slat fronts too. 

Test-fit the supports before securing them permanently. Tape the supports in place, with the bottom edge 3″–5″ above the seat. Have different users sit to test the support position for comfort. Once the supports feel right, attach each from behind with two small stainless-steel screws. Then remove the tape and relax. Did someone say, “Cottage Kolsch time?”

Categories
Cottage Life

Create a holiday bird feeder tree

If you’re looking for something fun to do with the kids this season or want to up your wintertime bird feeding game, decorate a tree in your yard with some DIY edible decorations. You may also get some squirrel or deer visitors; which are an extra visual bonus for the kids.

“What I think is fun about this idea is that you turn just filling up your bird feeder every day into a family activity,” says Jody Allair, Director, Community Engagement at Birds Canada. He says it’s a festive thing to do that goes beyond your typical decorating and becomes something the birds will appreciate. It’s also a way to build connections to the natural world. “We need more of those,” he says. “This is a great arts and crafts project to do as a family, and the reward is having birds in your yard.” It’s win-win for you and the birds.

First, pick a tree in your yard. Allair says it doesn’t have to be a conifer – even a bush will suffice. Speaking of trees, he also says once you’re done with your real Christmas tree, instead of putting it in the dump or in the garbage, you could ‘plant’ it outside once you’ve removed the tinsel, garland, and decorations. Of course the stump won’t take root in the frozen ground, but its branches can offer additional habitat for animals.

And since you’re doing all this to help the birds, “there are important elements to keep in mind to create a bird-friendly environment,” say Allair. “Don’t place the food or items in an area where birds are going to collide with the windows. Be strategic.” Also, if you have cats, keep them inside or on a leash. For anything you wish to hang, use natural string (the thicker the better he says); never use fishing line. “Natural string that can break down in the sun after a few months is fine.”

Now to the fun part. Here are five DIY feeder ideas you can make yourself this winter:

Hang bird-friendly Christmas cookies. Use this recipe from Birds Canada. Let your kids choose which shapes they’ll want their cookies to be.

Love blue jays? Give them peanuts, or peanut butter. “The best way to present them is with a peanut wreath, or Allair says you could simply string them together and hang them up. “They’re crazy for peanuts.”

Meet the blue jay

Pinecone feeders. Go for a nature walk and gather some pinecones (not spruce, though, as Allair says they’re too soft). Tie on a string for hanging them up, then add peanut butter. (Allair says regular popular store brands are okay.) The hearty, rigid cones have lots of openings to fill.

Make your own suet balls or cakes. These offer a lot of messy DIY fun for kids. Allair recommends using large plastic margarine tubs to keep the mess at a minimum – unless you like lard all over the place. “It’s fun to roll the suet in seeds,” he says. Which type is best? Allair recommends black oil sunflower seeds – they have a high fat content, which birds need, and all species of birds are able to open them (no nutcracker required).

Log feeder. If you’ve got some hollow branches on hand, you can hang those, filled with peanut butter. “The birds will pluck out the peanut butter,” he says.

The main goal for each of these is to provide things the birds would like to eat in the natural world, “but you’re presenting it in a festive way,” he says.

You can also DIY a more traditional bird feeder and fill it with seed. To attract cardinals, include some sunflower seeds inside. Cardinals are “robust and like the perch,” Allair says, so they’ll need a sturdy structure where they can enjoy their meal.

If you provide a mix of food, you can expect chickadees, red-breasted nuthatches, downy woodpeckers, blue jays, and hairy woodpeckers.

Once your tree’s all decorated, relax with some hot chocolate by the fire and watch for visitors that stop by to admire – and eat – the outdoor decorations.

Know someone that’s an avid birdwatcher? Allair says Birds Canada’s Project Feeder Watch program makes a great last-minute gift.

 

Categories
Cottage Life

Create a holiday bird feeder tree

If you’re looking for something fun to do with the kids this season or want to up your wintertime bird feeding game, decorate a tree in your yard with some DIY edible decorations. You may also get some squirrel or deer visitors; which are an extra visual bonus for the kids.

“What I think is fun about this idea is that you turn just filling up your bird feeder every day into a family activity,” says Jody Allair, Director, Community Engagement at Birds Canada. He says it’s a festive thing to do that goes beyond your typical decorating and becomes something the birds will appreciate. It’s also a way to build connections to the natural world. “We need more of those,” he says. “This is a great arts and crafts project to do as a family, and the reward is having birds in your yard.” It’s win-win for you and the birds.

First, pick a tree in your yard. Allair says it doesn’t have to be a conifer – even a bush will suffice. Speaking of trees, he also says once you’re done with your real Christmas tree, instead of putting it in the dump or in the garbage, you could ‘plant’ it outside once you’ve removed the tinsel, garland, and decorations. Of course the stump won’t take root in the frozen ground, but its branches can offer additional habitat for animals.

And since you’re doing all this to help the birds, “there are important elements to keep in mind to create a bird-friendly environment,” say Allair. “Don’t place the food or items in an area where birds are going to collide with the windows. Be strategic.” Also, if you have cats, keep them inside or on a leash. For anything you wish to hang, use natural string (the thicker the better he says); never use fishing line. “Natural string that can break down in the sun after a few months is fine.”

Now to the fun part. Here are five DIY feeder ideas you can make yourself this winter:

Hang bird-friendly Christmas cookies. Use this recipe from Birds Canada. Let your kids choose which shapes they’ll want their cookies to be.

Love blue jays? Give them peanuts, or peanut butter. “The best way to present them is with a peanut wreath, or Allair says you could simply string them together and hang them up. “They’re crazy for peanuts.”

Meet the blue jay

Pinecone feeders. Go for a nature walk and gather some pinecones (not spruce, though, as Allair says they’re too soft). Tie on a string for hanging them up, then add peanut butter. (Allair says regular popular store brands are okay.) The hearty, rigid cones have lots of openings to fill.

Make your own suet balls or cakes. These offer a lot of messy DIY fun for kids. Allair recommends using large plastic margarine tubs to keep the mess at a minimum – unless you like lard all over the place. “It’s fun to roll the suet in seeds,” he says. Which type is best? Allair recommends black oil sunflower seeds – they have a high fat content, which birds need, and all species of birds are able to open them (no nutcracker required).

Log feeder. If you’ve got some hollow branches on hand, you can hang those, filled with peanut butter. “The birds will pluck out the peanut butter,” he says.

The main goal for each of these is to provide things the birds would like to eat in the natural world, “but you’re presenting it in a festive way,” he says.

You can also DIY a more traditional bird feeder and fill it with seed. To attract cardinals, include some sunflower seeds inside. Cardinals are “robust and like the perch,” Allair says, so they’ll need a sturdy structure where they can enjoy their meal.

If you provide a mix of food, you can expect chickadees, red-breasted nuthatches, downy woodpeckers, blue jays, and hairy woodpeckers.

Once your tree’s all decorated, relax with some hot chocolate by the fire and watch for visitors that stop by to admire – and eat – the outdoor decorations.

Know someone that’s an avid birdwatcher? Allair says Birds Canada’s Project Feeder Watch program makes a great last-minute gift.

 

Categories
Cottage Life

Create a holiday bird feeder tree

If you’re looking for something fun to do with the kids this season or want to up your wintertime bird feeding game, decorate a tree in your yard with some DIY edible decorations. You may also get some squirrel or deer visitors; which are an extra visual bonus for the kids.

“What I think is fun about this idea is that you turn just filling up your bird feeder every day into a family activity,” says Jody Allair, Director, Community Engagement at Birds Canada. He says it’s a festive thing to do that goes beyond your typical decorating and becomes something the birds will appreciate. It’s also a way to build connections to the natural world. “We need more of those,” he says. “This is a great arts and crafts project to do as a family, and the reward is having birds in your yard.” It’s win-win for you and the birds.

First, pick a tree in your yard. Allair says it doesn’t have to be a conifer – even a bush will suffice. Speaking of trees, he also says once you’re done with your real Christmas tree, instead of putting it in the dump or in the garbage, you could ‘plant’ it outside once you’ve removed the tinsel, garland, and decorations. Of course the stump won’t take root in the frozen ground, but its branches can offer additional habitat for animals.

And since you’re doing all this to help the birds, “there are important elements to keep in mind to create a bird-friendly environment,” say Allair. “Don’t place the food or items in an area where birds are going to collide with the windows. Be strategic.” Also, if you have cats, keep them inside or on a leash. For anything you wish to hang, use natural string (the thicker the better he says); never use fishing line. “Natural string that can break down in the sun after a few months is fine.”

Now to the fun part. Here are five DIY feeder ideas you can make yourself this winter:

Hang bird-friendly Christmas cookies. Use this recipe from Birds Canada. Let your kids choose which shapes they’ll want their cookies to be.

Love blue jays? Give them peanuts, or peanut butter. “The best way to present them is with a peanut wreath, or Allair says you could simply string them together and hang them up. “They’re crazy for peanuts.”

Meet the blue jay

Pinecone feeders. Go for a nature walk and gather some pinecones (not spruce, though, as Allair says they’re too soft). Tie on a string for hanging them up, then add peanut butter. (Allair says regular popular store brands are okay.) The hearty, rigid cones have lots of openings to fill.

Make your own suet balls or cakes. These offer a lot of messy DIY fun for kids. Allair recommends using large plastic margarine tubs to keep the mess at a minimum – unless you like lard all over the place. “It’s fun to roll the suet in seeds,” he says. Which type is best? Allair recommends black oil sunflower seeds – they have a high fat content, which birds need, and all species of birds are able to open them (no nutcracker required).

Log feeder. If you’ve got some hollow branches on hand, you can hang those, filled with peanut butter. “The birds will pluck out the peanut butter,” he says.

The main goal for each of these is to provide things the birds would like to eat in the natural world, “but you’re presenting it in a festive way,” he says.

You can also DIY a more traditional bird feeder and fill it with seed. To attract cardinals, include some sunflower seeds inside. Cardinals are “robust and like the perch,” Allair says, so they’ll need a sturdy structure where they can enjoy their meal.

If you provide a mix of food, you can expect chickadees, red-breasted nuthatches, downy woodpeckers, blue jays, and hairy woodpeckers.

Once your tree’s all decorated, relax with some hot chocolate by the fire and watch for visitors that stop by to admire – and eat – the outdoor decorations.

Know someone that’s an avid birdwatcher? Allair says Birds Canada’s Project Feeder Watch program makes a great last-minute gift.

 

Categories
Cottage Life

This broken Muskoka chair turned coffee table is the perfect sunroom addition

The sunroom at Janet Fletcher and Ed Graca’s cottage is a great place to enjoy a morning coffee and take in views of the lake, save for one thing—it needed a coffee table, one that would fit the small space and suit their 70-year-old Lake Muskoka cottage. “We don’t have a big, fancy place that you’re going to get a $900 coffee table for,” says Janet. It worked out well, then, that they had a broken, folding Muskoka chair lying around. “We didn’t know what to do with it,” says Ed, “but I thought I could use the back of the chair for the top of a table.” To test his theory, Ed disassembled the old chair and started playing around with the pieces. He converted four arm supports into table legs, which he secured using the metal pins that allowed the chair to fold down, and stabilized the legs with support pieces from the back and the seat. The chair arms became a shelf, and the chair back became the coffee table top, secured with wood glue and screws. Finally, Ed sealed it with a couple coats of polyurethane. “I tried to keep it as natural as possible,” he says.

It’s the work of a true cottage putterer. “I didn’t use a plan at all,” says Ed. “But I was able to put it together and make it look nice.”

Solved a cottage problem by building something? Tell us about it: edit@cottagelife.com.